8+ タイヤレバー使い方 References

【ゴリックスタイヤレバーの使い方】簡単！滑らせてひっかけるだけトライアスロンブログ「トランジションエリア」 from www.triathlon.style

Introduction

Changing a flat tire can be a daunting task for new drivers, especially if you have never used tire levers before. Tire levers are essential tools for removing tires from rims without damaging them. In this article, we will show you how to use tire levers in a step-by-step guide.

What are Tire Levers?

Tire levers, also known as tire irons, are specialized tools used to pry the tire from the rim of a wheel. They typically come in a set of two or three and are made of strong, durable materials such as metal or plastic.

Step-by-Step Guide to Using Tire Levers

Step 1: Prepare the Bike

Before you begin, make sure your bike is on a flat surface and the tire you want to remove is completely deflated. Also, ensure that you have all the necessary tools, including tire levers, a new inner tube, and a pump.

Step 2: Position the Tire Levers

Insert the first tire lever between the tire and the rim, making sure the hook is firmly hooked onto the edge of the rim. Then, insert the second lever a few inches away from the first one, also hooked onto the rim.

Step 3: Pry the Tire Off

Using the two levers, pry the tire off the rim by lifting the tire away from the rim. You should hear a popping sound as the tire releases from the rim.

Step 4: Remove the Tube

Once the tire is off the rim, remove the tube from inside the tire by gently pulling it out.

Step 5: Inspect the Tire

Before installing the new inner tube, inspect the tire for any damage, such as cuts or punctures. If the tire is damaged, it will need to be replaced.

Step 6: Install the New Inner Tube

Insert the new inner tube into the tire, starting at the valve stem. Carefully work the tube into the tire, making sure it is not twisted or pinched.

Step 7: Reinstall the Tire

Starting at the opposite side of the valve stem, use the tire levers to push the tire back onto the rim. Work your way around the tire, using the levers to push the tire onto the rim until the entire tire is back in place.

Step 8: Inflate the Tire

Using a pump, inflate the tire to the recommended pressure level. You can find the recommended pressure level on the side of the tire.

Step 9: Check for Leaks

After inflating the tire, check for any leaks by submerging it in water. If you see bubbles, there is a leak and you will need to repeat the process.

Step 10: Finish Up

Once you have confirmed that the tire is holding air, use a wrench to tighten the nuts on the wheel. You can now enjoy a smooth ride on your freshly repaired tire!

Conclusion

Changing a flat tire can be intimidating, but with the right tools and a little bit of know-how, it's a task that anyone can tackle. Follow this guide on how to use tire levers, and you'll be back on the road in no time!

8+ タイヤレバー使い方 References

Introduction

What are Tire Levers?