8+ マークソフター使い方 References

宇宙戦艦ヤマト2202 ドレッドノート級主力戦艦アオキャンのブログ from ameblo.jp

Introduction

If you're into model building, using decals is an essential part of the process. Applying decals, however, can be a daunting task, especially if you're not familiar with the right tools and techniques. This is where Mark Softer comes in handy, a popular decal softener that enhances the adhesion of decals to your models. In this article, we'll give you a step-by-step guide on how to use Mark Softer like a pro.

What is Mark Softer?

Mark Softer is a decal softener solution that is used to soften the decal film and make it adhere better to the surface of your model. It is typically used on decals that have been applied to curved or irregular surfaces, where they may not adhere properly. Mark Softer softens the decal film, allowing it to conform to the contours of your model, resulting in a more realistic and seamless finish.

How to Use Mark Softer

Using Mark Softer is easy, and you don't need any special skills or tools to get started. Here's a step-by-step guide on how to use Mark Softer:

Step 1: Apply the Decal

Before using Mark Softer, you need to apply the decal to your model. Make sure the surface is clean and dry before applying the decal. Once you've positioned the decal, use a soft brush or cotton swab to remove any air bubbles.

Step 2: Apply Mark Softer

Once the decal is in place, you can apply Mark Softer. Simply dip a soft brush or cotton swab into the solution and apply it to the decal. Be sure to apply the solution evenly and avoid letting it pool or run.

Step 3: Wait for the Solution to Dry

After applying the Mark Softer, you need to wait for the solution to dry. This should take about 10-15 minutes. During this time, the solution will soften the decal film, allowing it to conform to the surface of your model.

Step 4: Remove Excess Solution

Once the solution has dried, you can remove any excess with a soft brush or cotton swab. Be gentle, as the decal may still be fragile at this point.

Step 5: Apply Topcoat

Finally, you can apply a topcoat to protect the decal and give your model a finished look. You can use a matte, semi-gloss, or gloss topcoat, depending on your preference.

Tips for Using Mark Softer

Here are some additional tips to help you get the most out of Mark Softer: - Use a soft brush or cotton swab to apply the solution, as a hard brush can damage the decal. - Apply the solution sparingly, as too much can cause the decal to wrinkle or distort. - Be patient and wait for the solution to dry completely before removing any excess. - If you're working with a large decal, you may need to apply the solution in sections to avoid it drying too quickly.

Conclusion

Using Mark Softer is an effective way to improve the adhesion of decals to your model, resulting in a more realistic and seamless finish. By following the steps outlined in this article and using the tips we've provided, you'll be able to use Mark Softer like a pro in no time. Happy modeling!